Wood Sage & Sea Salt Fragrance Oil

Wood Sage & Sea Salt Fragrance Oil

$5.00$520.00

Wood Sage & Sea Salt fragrance oil is a refreshing blend of fresh sage, sea spray and sea salt backed by fir needles and oudh.

Fragrance Description

Wood Sage & Sea Salt fragrance oil is a refreshing blend of fresh sage, sea spray and sea salt backed by fir needles and oudh.

This is not a perfume. It is a highly concentrated fragrance oil meant for use in crafting products such as candles, soaps, perfumes, diffusers bath and body products. Due to the highly concentrated nature of our fragrance oils they cannot be used directly on the skin.

Fragrance Notes

Top Notes:

Bergamot, Mandarin, Sage, Sea Salt

Mid Notes:

Fir Needles, Ocean

Base Notes:

Oudh, Cedar, Musk

Use our Perfume Calculator

Our handy calculator will do all the maths for you!

Use our Perfume Calculator

Our handy calculator will do all the maths for you!

Making Perfume & Cologne

Eau de Cologne – Usage Rate:

2 – 4%

Eau de cologne (EDC) has a much lower fragrance concentration (about 2% to 4%) than the EDT with a high alcohol content, and therefore it is the cheapest option. It generally lasts for up to two hours.

Eau de Toilette – Usage Rate:

5 – 15%

Eau de toilette (EDT) has a fragrance concentration of between 5% to 15%. It is cheaper than the EDP and is one of the most popular types of fragrance available. It will normally last two to three hours and is a popular choice for affordable body mists and roll-on perfumes.

Eau de Parfum – Usage Rate:

15 – 20%

The next highest fragrance concentration would be eau de parfum (EDP) with oil concentration between 15 to 20%. On average, you can get a good four to five hours of your fragrance lasting.

Perfume – Usage Rate:

20 – 30%

With more than 20% oil concentration, you are likely to still notice your fragrance working from morning to evening. Perfumes have the highest fragrance concentration and would last the longest among all other types: usually six to eight hours. These are also the most expensive due to the high concentration of fragrance and/or essential oils.

ScentStay (optional):

2%

Perfumers Alcohol (Spray On):

Up to 100%

Mineral Oil (Roll On):

Up to 100%

How to guide:

a) Decide if you want a spray or roll on product, then choose a suitable bottle.

Make a note of the volume capacity of the bottle: Roller bottles are usually 10ml. Spray bottles usually come in 30 – 100ml sizes.

b) Pick how strong a product you want: full strength perfume, or maybe a light body mist? Check the usage rates above and pick a number from the percentage range.

You should now have two numbers written down: bottle volume (BV) and fragrance strength (FS)

Now it’s time for a little maths.

How to calculate the formula:

  1. Take the volume of the bottle (BV) from Step One. In my example I’m using a 50ml spray bottle. So my first number in the formula is 50.
  2. Take the percentage of strength (FS) for the type of product you’re making. In my example I’ve decided to make a Perfume, and I’ve picked a strength of 30% (middle of the range). So my second number in the formula is 0.3

    To convert a percentage to a number, move the decimal place two places over to the left, eg: 30.00% = 0.30 or 9.00% = 0.09 If you get stuck on the conversion, you can use this handy calculator:
    Percent to Decimal Calculator

  3. I’ve also decided to use ScentStay to help my perfume last a little longer. The usage rate for this is 2%, so my third number is 0.02
The Formula

50 x 0.3 = 15 (the amount of fragrance required: BV x FO)
50 x 0.02 = 1 (the amount of ScentStay required: BV x SS)

Total = 16ml

Now for the last piece of math: how much carrier (alcohol or oil) to use. Take the BV (50 in my example) and minus the total of fragrance and ScentStay (16 in my example)

50 – 16 = 34

34ml is the amount of carrier needed to fill my bottle.

Now for the fun part. 

Using the numbers from Step Two, measure the fragrance oil (FO) and ScentStay (SS) into a small beaker or mixing bowl, and mix well

Measure your carrier of choice into a separate beaker or bowl. Add the FO/SS blend, or just FO if not using ScentStay, to the carrier and mix well.

So for my perfume, these are my final numbers:

15ml Fragrance oil
1ml ScentStay
34ml Perfumers alcohol

Pour into your bottle, cap and you’re done!

Fragrance Properties

Candle Usage Rate:

6 – 12%

Soap Usage Rate:

3 – 6%

Lotion Usage Rate:

1 – 2%

Perfume Usage Rate:

1 – 15%

Diffuser Usage Rate:

25 – 35%

Flashpoint:

> 93°C

Vanillin Content:

0.0%

Phthalate Free:

Yes

Cold Process Soap Testing

Acceleration:

None

Discolouration:

None

Strength:

Good

Notes:

Slow to trace with no acceleration. Plenty of time to work with.

Product Reviews

3 reviews for Wood Sage & Sea Salt Fragrance Oil

5 Star

33.33 %
1 review(s)

4 Star

33.33 %
1 review(s)

3 Star

0 %
0 review(s)

2 Star

33.33 %
1 review(s)

1 Star

0 %
0 review(s)

Reviewed by 03 customer(s)

Sort by

  • Avatar

    Margaret Reedy

    Unfortunately I found this fragrance too weak for candles – at 10% I couldn’t smell it at all, and 12% unfortunately wasn’t a really any better unless you put your nose very close to the flame. Such a shame as a beautiful fragrance – may be better for soap.

    29/05/2024
    Verified Review

    Share on

    Helpful?

  • Avatar

    Alice Xu

    Nice light, soapy scent.I got an amazing hot throw using it in my candle. Added in 12% of this into a 70/30 soy coconut wax blend I blended myself & I could smell it in the hallway from my bathroom where I placed my candle. Very happy with the result.

    02/10/2023
    Verified Review

    Share on

    Helpful?

  • Avatar

    tmhalligan1981

    Not overpowering in candles and melts, it’s a lovely fragrance, almost like a cologne. I love it but it’s had mixed reviews with customers

    01/01/1970
    Verified Review

    Share on

    Helpful?

Leave feedback about this

Shopping Cart
Scroll to Top