Honeysuckle fragrance oil for use in candles, soap, perfume, diffusers and more

Our fragrance oil bottles come in a variety of sizes from 25ml to 5 litres.

Honeysuckle Fragrance Oil

Honeysuckle Fragrance Oil

Size

Clear

Honeysuckle fragrance oil is a blend of fresh honeysuckle with hints of jasmine, rose, and lilac.

Fragrance Description

Honeysuckle fragrance oil is a blend of fresh honeysuckle with hints of jasmine, rose, and lilac.

This is not a perfume. It is a highly concentrated fragrance oil meant for use in crafting products such as candles, soaps, perfumes, diffusers bath and body products. Due to the highly concentrated nature of our fragrance oils they cannot be used directly on the skin.

Fragrance Notes

Top Notes:

Ozone

Mid Notes:

Honeysuckle, Jasmine, Rose, Lilac

Base Notes:

Woods

IFRA Certificate

Safety Data Sheet

Allergen Certificate

Making Perfume & Cologne

Eau de Cologne – Usage Rate:

2 – 4%

Eau de cologne (EDC) has a much lower fragrance concentration (about 2% to 4%) than the EDT with a high alcohol content, and therefore it is the cheapest option. It generally lasts for up to two hours.

Eau de Toilette – Usage Rate:

5 – 13%

Eau de toilette (EDT) has a fragrance concentration of between 5% to 15%. It is cheaper than the EDP and is one of the most popular types of fragrance available. It will normally last two to three hours and is a popular choice for affordable body mists and roll-on perfumes.

Eau de Parfum – Usage Rate:

Not suitable

The next highest fragrance concentration would be eau de parfum (EDP) with oil concentration between 15 to 20%. On average, you can get a good four to five hours of your fragrance lasting.

Perfume – Usage Rate:

Not suitable

With more than 20% oil concentration, you are likely to still notice your fragrance working from morning to evening. Perfumes have the highest fragrance concentration and would last the longest among all other types: usually six to eight hours. These are also the most expensive due to the high concentration of fragrance and/or essential oils.

ScentStay (optional):

2%

Perfumers Alcohol (Spray On):

Up to 100%

Mineral Oil (Roll On):

Up to 100%

How to guide:

Step One - The Decision

a) Decide if you want a spray or roll on product, then choose a suitable bottle.

Make a note of the volume capacity of the bottle: Roller bottles are usually 10ml. Spray bottles usually come in 30 – 100ml sizes.

b) Pick how strong a product you want: full strength perfume, or maybe a light body mist? Check the usage rates above and pick a number from the percentage range.

You should now have two numbers written down: bottle volume (BV) and fragrance strength (FS)

Step Two - The Formula

Now it’s time for a little maths.

How to calculate the formula:

Take the volume of the bottle (BV) from Step One. In my example I’m using a 50ml spray bottle. So my first number in the formula is 50.
Take the percentage of strength (FS) for the type of product you’re making. In my example I’ve decided to make a Perfume, and I’ve picked a strength of 30% (middle of the range). So my second number in the formula is 0.3
To convert a percentage to a number, move the decimal place two places over to the left, eg: 30.00% = 0.30 or 9.00% = 0.09 If you get stuck on the conversion, you can use this handy calculator:
Percent to Decimal Calculator
I’ve also decided to use ScentStay to help my perfume last a little longer. The usage rate for this is 2%, so my third number is 0.02

The Formula

50 x 0.3 = 15 (the amount of fragrance required: BV x FO)
50 x 0.02 = 1 (the amount of ScentStay required: BV x SS)

Total = 16ml

Now for the last piece of math: how much carrier (alcohol or oil) to use. Take the BV (50 in my example) and minus the total of fragrance and ScentStay (16 in my example)

50 – 16 = 34

34ml is the amount of carrier needed to fill my bottle.

Step Three - Putting It Together

Now for the fun part.

Using the numbers from Step Two, measure the fragrance oil (FO) and ScentStay (SS) into a small beaker or mixing bowl, and mix well

Measure your carrier of choice into a separate beaker or bowl. Add the FO/SS blend, or just FO if not using ScentStay, to the carrier and mix well.

So for my perfume, these are my final numbers:

15ml Fragrance oil
1ml ScentStay
34ml Perfumers alcohol

Pour into your bottle, cap and you’re done!

Fragrance Properties

Candle Usage Rate:

6 – 12%

Soap Usage Rate:

2.4%

Lotion Usage Rate:

0.5 – 1%

Perfume Usage Rate:

1 – 13%

Diffuser Usage Rate:

25 – 35%

Flashpoint:

> 93°C

Vanillin Content:

0.0%

Phthalate Free:

Yes

Cold Process Soap Testing

Acceleration:

Moderate

Discolouration:

None

Strength:

Good

Notes:

There is acceleration, so be prepared to move fast or increase your water. No ricing, no discoloration.

Product Reviews

Reviews (2)

2 reviews for Honeysuckle Fragrance Oil

5

/5

Based on 02 rating(s)

01 Customer(s) recommended this item

5 Star

4 Star

3 Star

2 Star

1 Star

Reviewed by 02 customer(s)

Sort by

Katie Fox
Clean and calming. Evokes memories of balmy Bali evenings in a beautiful resort. Using in a diffuser, I’ve found this fragrance to be strong and consistent.

07/04/2024

Verified Review
Share on
Helpful?
Reply
debbie_webby
This has got to be one of the best fragrances I have smelt for a long time, it brings back so many childhood memories 😀 Even my hubby loved it 😀 It behaved very well while using it in CP soap. But I have noticed that the fragrance doesnt stick for as long as I would like. After curing for 4-6 weeks, the smell decreased a lot. Still smells good though, and I will be ordering more.

01/01/1970

Verified Review
Share on
Helpful?
Reply

Leave feedback about this Cancel reply

You must be logged in to post a review.

Copyright © 2024 Zen Aroma